Brick paving in Geraldton.
Brick paving is the Mid West classic for a reason. Clay and concrete brick pavers are dense, salt-tolerant, hold their colour, and can be lifted and relaid one brick at a time. We lay courtyards, paths, patios and driveways in herringbone, stretcher and basketweave bonds, all on a properly compacted base.
Why brick paving suits Geraldton.
Brick paving has been the default across Geraldton and the Mid West for decades, and it earns that place. A fired clay brick paver is extremely dense, which means it barely absorbs water and shrugs off the salt that the Geraldton Doctor carries inland every summer afternoon. The colour in a clay brick is fired right through, so it does not fade or wear off the way a coated surface can. And because each brick is an individual unit sitting on bedding sand, the whole pavement stays flexible and forgives the small ground movements that crack a rigid concrete slab.
That flexibility is also why brick paving is so easy to live with. If a base settles, a tree root lifts a corner, or a plumber needs to trench through for a new line, we lift the affected bricks, fix what is underneath, and relay the same bricks. You would never know the patch had been opened. That is a job we do regularly on older Geraldton courtyards, and it costs a fraction of replacing a cracked slab.
Patterns and where they belong.
- Herringbone: The strongest bond, laid at 45 or 90 degrees. The right choice for driveways and anything that takes vehicle or turning loads, because the bricks interlock and cannot creep.
- Stretcher bond: Clean, simple, running-bond rows. Great for paths and contemporary courtyards.
- Basketweave: A traditional, decorative pattern for patios and feature areas where the look leads.
- Soldier-course border: A contrasting row of bricks on edge framing the area, giving both a clean edge and part of the edge restraint.
A worked example.
A common job is a 30 square metre rear courtyard on a Glenfield or Wandina block, laid in a 45-degree herringbone clay brick with a contrasting soldier-course border. That comes in around $3,000 to $4,200 in 2026, including the compacted base, stabilised jointing sand and the edge restraint. A path off the front door in the same brick to tie the look together is typically another $1,000 to $1,800 depending on length. Full rates are on the pricing page.
Works with the rest of your block.
Brick paving pairs naturally with a matching paved driveway in herringbone, and we often run brick paths up to a cooler, pale limestone entry or pool surround for contrast. On a stepped block, the brick courtyard sits above an engineered retaining wall.
Where we lay brick paving.
Brick paving questions.
How much does brick paving cost in Geraldton?
$95 to $140 per square metre supplied and laid in 2026. A 30 square metre herringbone courtyard or path is around $3,000 to $4,200. More cutting for diagonal patterns or soldier-course borders adds labour but lifts the finish.
Clay or concrete brick paving?
Clay holds its colour for life and is very dense, which is excellent against coastal salt. Concrete is cheaper with more colours and shapes but can fade over many years. Near the coast we lean toward dense clay.
What laying patterns work best?
Herringbone for driveways and load areas because it interlocks. Stretcher bond and basketweave for paths and courtyards. A contrasting soldier-course border frames the area and aids the edge restraint.
Can old brick paving be lifted and relaid?
Yes, that is one of its best features. A section lifts to fix a sunken patch or run a service trench, then relays with the same bricks. Far cheaper than tearing out a cracked slab.
Free brick paving measure and quote.
Courtyard, path, patio or driveway, we will price it laid the right way.